IPC562E-DUG
2MP WDR Starlight Network Box Camera
- 1/1.9" progressive scan CMOS
- Up to 1920 × 1080 resolution, 60fps
- 120dB True WDR
- ABF
- Optical fiber interface
- HLC, 3D DNR, ROI, Corridor Mode, ONVIF
- Motor Zoom/focus ports
- AC24V, DC12V, PoE. Wide voltage range of ±25%
Model | IPC562E-DUG |
---|---|
Camera | |
Sensor | 1/1.9"progressive scan ,CMOS |
Lens Mount | CS |
Shutter | Auto/Manual, 1/6~1/100000 s |
Minimum Illumination | Colour: 0.005 Lux (F1.2, AGC ON) B/W:0.0005 Lux(F1.2, AGC ON) |
Iris | DC-Iris 4V (4-Pin)/P-Iris 5V (4-Pin) |
Day & Night | Automatically removable IR-cut filter(ICR) |
Digital noise reduction | 2D/3D DNR |
Motor Zoom/focus | DC 5V (4-Pin) |
S/N | >52dB |
Defog | Optical Defog & Digital Defog |
WDR | 120dB |
Video | |
Video Compression | Ultra 265,H.265, H.264, MJPEG |
H.264 code profile | Baseline profile, Main Profile, High Profile |
Frame Rate | Main Stream:2MP (1920×1080): Max. 60 fps; Sub Stream:2MP (1920×1080): Max. 60 fps; Third Stream:D1 (720×576): Max. 60 fps |
9:16 Corridor Mode | Supported |
HLC | Supported |
BLC | Supported |
ABF | Supported |
OSD | Up to 8 OSDs |
ROI | Up to 8 areas |
Privacy Mask | Up to 8 areas |
Motion Detection | Up to 4 areas |
Smart | |
Behavior Detection | Intrusion, cross line, motion detection |
Exception Detection | Audio detection |
Intelligent Identification | Face detection, Defocus, Scene Change |
Statistical Analysis | People counting |
General Function | Watermark, IP Address Filtering, Tampering Alarm, Alarm input, Alarm output, Access Policy, ARP Protection, RTSP Authentication, User Authentication |
Audio | |
Audio Compression | G.711 |
Two-way Talking | Supported |
Suppression | Supported |
Sampling Rate | 8 KHZ |
Storage | |
Edge Storage | Micro SD, up to 128 GB |
Network Storage | ANR |
Network | |
Protocols | IPv4, IGMP,ICMP, ARP, TCP, UDP, DHCP, PPPoE, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, 802.1x, SNMP |
Compatible Integration | ONVIF(Profile S, Profile G), API |
Interface | |
Audio I/O | 3.5 mm audio interface |
Input: impedance 35 kΩ; amplitude 2 V [p-p] | |
Output: impedance 600 Ω; amplitude 2 V [p-p] | |
Alarm I/O | 2 / 1 |
Serial Port | 1 RS485 (support Pelco-D/P) |
Network | 1 RJ45 100M/1000M Base-FX SFP+100M/1000M Base-TX Ethernet |
Video Output | 1 BNC, impedance 75 Ω; amplitude 1 V [p-p] |
General | |
Power | 24 V AC±25%, 12 V DC±25%, PoE (IEEE802.3 af) |
Power consumption: Max 6.8W | |
Dimensions (L x W xH) | 151.5 x 71 x 65 mm (6.0“ x 2.8“ x 2.6”) (excluding the lens) |
Weight | 0.48 kg (1.1 lb) |
Working Environment | –20°C ~ 60°C (-4°F ~ 140°F), Humidity :10%~90% RH(non-condensing) |
Reset Button | Supported |