NSW2000-8T1GC-POE - Uniview Korea co., Ltd.


8-Port PoE Switch

  • 8×10/100Mbps Ethernet ports
  • 1×Gigabit combo port (RJ45 and SFP)
  • All 100Mbps ports support PoE
  • PoE complies with IEEE802.3af/at, up to 30W for single port
  • Up to 250m transmission distance on EXTEND mode
  • Easy to use, no need to configure
  • High quality with all metal housing

NSW2000-8T1GC-POE is an 8-port poe switch, which provides 8 10/100Mbps PoE ports and 1 Gigabit combo port. All ports spport wire speed, non-blocking switching and auto MDI/MDIX. Besides common switch features, NSW2000-8T1GC-POE supports EXTEND mode special for video surveillance. When EXTEND mode is enabled, the transmissin distance with Uniview IPC can reach up to 250m.

Ports8×10/100Base-TX autosensing Ethernet ports(all support PoE)
1×Gigabit combo port (RJ45 and SFP)
Port attribute10/100/1000Mbit/s transfer rate
Half-duplex, full-duplex and auto-negotiation
StandardsIEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
ANSI/IEEE 802.3 NWay
IEEE 802.3x flow control
IEEE 802.3af PoE
IEEE 802.3at PoE
Packet forwarding rate2.68Mpps
Switching capacity3.6Gbps
EXTEND modeDisabled: all ports can communicate with each other, and monitoring optimization is disabled.
Enabled: Downlink ports can only communicate with uplink ports, monitoring optimization is enabled, and transmission distance can be extended to up to 250 meters.
Status LEDsLink/Act (steady green): link is normal
Link/Act (flashing green): data is being forwarded
Link/Act (off): no link
PoE (steady orange): the port is powering a powered device properly
PoE (off): the port is not connected to any powered device or is not supplying power
Power (steady green): AC input is normal
Power (off): AC input is abnormal
Max PoE capacity: 115 W
Consumption≤ 120 W
DC voltage54 V , 2.2A
Operating temperature0°C-40°C (32°F-104°F)
Operating humidity10%-85%
Storage temperature-10°C-70°C (14°F-158°F)
Storage humidity10%-90%
Dimensions (W×D×H)235mm×110mm×27mm (9.3"×4.3"×1.1")